You've Admired the Fountain
Now Read the Story

Everyone knows it’s great to have friends. But when the friends are as talented as John Fox, well, it’s even better. He and George Henderson, President of Quality Systems, have known each other for many years. So in 1992, when John showed George a photograph of a fountain John had made for the owner of the Piggly Wiggly food chain, George knew he had to have one for himself.

Read The Full Story

Application Tip - Installing Mesh on a Driveway

When installing PermaMesh fiber cloth on a driveway (after other appropriate procedures have been completed), first cut each mesh piece long enough to span the width of the driveway. Cut enough width pieces to cover the entire length of the driveway surface. Roll each piece individually and place them side by side along the edge of the entire length of the driveway with the mesh ends overlapping the edge of the driveway to make sure the entire surface is covered.

When all the mesh pieces are properly laid out end-to-end along the edge of the driveway surface, pour a small amount of Matrix Mix onto the driveway in front of the rolled-up mesh one roll at a time and then unroll that mesh into the skim coat and spread the Matrix Mix over the mesh with a squeegee. Repeat this process with each roll of mesh and remember to overlap each piece by 2 inches with the next piece of mesh. Continue until all the mesh rolls have been unrolled and the entire driveway surface is covered. If needed to cover and obscure the mesh, add more Matrix Mix as you unroll each piece of the mesh.

Tech Tip - Excellent Stress Relief...
For Concrete

EXPANSION JOINTS. Poured concrete slabs require stress relief to prevent surface deterioration in the form of cracks. An expansion joint is generally defined as a void that contains dividers made of felt, rubber, plastic, or wood and are attached during the framing stage of the concrete form and left in place until cured.

Read The Full Story